Holtz Industries

Rayco container lids

Container Lids | Shovels | Container Parts | Roll-off Hold Downs | Roll-off Door Chain Holder

Container Lids

Container lids

Lid length is from center of hinge hole to front of lid
5 year lid warranty
Vacuum molded lids

Rear Load Lids	R-31 X 28 R-31 X 30 R-31 X 37 1/2 R-31 X 39 R-31 X 42 1/2 R-31 X 44 1/2 R-31 X 51
Front Load Lids	R-36 X 38 R-36 X 41 R-36 X 46 1/4 R-36 X 48 1/4 R-36 X 58
Sliding Door	R-30 X 24 R-30 X 30

Shovels

Poly Shovels

Solid One Piece Polypropylene Construction!
Strong, Durable, Non-Sparking
Chemical and Corrosion Resistant
Virtually Unbreakable
Lightweight and Cleans Easily

Poly Shovel Sizes

R-3725 14" x 17" x 42"

R-3726 11" x 14" x 38"

Shovel With Wood Handle

R-3722

Container parts

Ground Roller With Brackets Pin Has Grease Fitting Custom Made Sizes Available Part numbers and sizes (Height x Width) R-3720-1 (8” x 6”) R-3720-2 (8” x 10”) R-3720-0 (10” x 8”) R-3720-10 (6-1/2” x 6”) R-3720-11 (6-1/2” x 9”) R-3720-7 (6” x 12”) R-3720-8 (10-3/4” x 12”)
Rubber Ground Rollers Part numbers and sizes (Height x Width) R-3730-01 (6" x 8") R-3730-02 (6" x 10") R-3730-03 (6" x 12") R-3730-04 (8" x 8") R-3730-05 (8" x 10") R-3730-06 (8" x 12") R-3730-07 (10" x 8") R-3730-08 (10" x 10") R-3730-09 (10" x 12") R-3730-10 (12" x 10") R-3730-11 (12" x 12")
Ground Roller With Pin Pin Has Grease Fitting Custom Made Sizes Available Part numbers and sizes (Height x Width) R-3720-30 (6-1/2” x 6”) R-3720-31 (6-1/2” x 9”) R-3720-3 (10” x 8”) R-3720-4 (8” x 10”) R-3720-5 (8” x 6”)
Nose Rollers With Greasable Pins Cast Steel Rollers with Pin 40,000 lbs Per Roller M-4 x 4 M-4 x 4-1/2 M-4 x 6 Carbon Steel Rollers with Pin R-4 x 4HD R-4 x 4-1/2 HD R-4 x 6HD
Quick Change Caster Pads R-CP For 4” x 4-1/2” Top Plate Caster You Can Weld On To Can Change Caster Fast By Pulling One Bolt Out
Lid Ears R-3711 Hole at 1-3/4" and 3-3/4" 3/16" Thick 9/16" Hole
1/2" Lid Rods Bent rods threaded on one side, others threaded on both Z = Zinc Plated Rod B = Bent Rod BZ = Bent Zinc Plated Rod 1/2” Rods R-3713 (65”) R-3714 (75”) Part Numbers R-3714 R-3714-01Z R-3714-02B R-3714-03BZ R-3713 R-3713-01Z R-3713-02B R-3713-03BZ
1/2" Star for Rod or Lid Spacer R-3727
1/2" Lock Collar R-3712
Drive Cap R-3728 1/2” 3/8” 7/16” 5/8"
Drain Flanges R-3717-FDF050 Size-1/2” R-3717-FDF075 Size-3/4” R-3717-FDF100 Size-1” R-3717-FDF125 Size-1-1/4” R-3717-FDF150 Size-1-1/2”
Drain Plugs (Steel) R-3729-050-S Size-1/2" NPT R-3729-075-S Size-3/4" NPT R-3729-100-S Size- 1" NPT R-3729-125-S Size- 1 1/14" NPT R-3729-150-S Size- 1 1/2" NPT
Drain Plugs (Plastic) R-3729-050 Size-1/2” NPT R-3729-075 Size-3/4” NPT R-3729-100 Size-1” NPT R-3729-125 Size-1-1/4” NPT R-3729-150 Size-1-1/2” NPT
Auto Can Lid Lock Front Mount
Auto Can Lid Lock Side Mount
Manual Locks 204MBH2
Roll-Off Box Nose Cone M-G-H40 M-G-H40-6x10 10” Overall 1-1/4” Thick
Heavy Duty Roll-Off Door Hinge R-3721
Container Hook M-G-C92
Dead Lift Receiver For Front Of Box M-G-1214AO
Cable Lid Lock R-3724 with lock R-3724-00 with no lock
Rear Load Cans 12 Gauge Steel Body 10 Gauge Bottom Shids 10 Gauge Top Rails 1-1/2” Trunnion Bar R-2 Yard Slope R-3 Yard R-4 Yard (Tall) R-4 Yard On Casters R-6 Yard R-8 Yard (Tall) R-8 Yard Low and Long

Roll-off Hold Downs

M-G-4471BO-89 Economy Hold Down Assembly Hook is sewn right onto belt, no bolt or hammer lock connector. M-G-4471-BH-EP Belt & Hook Assembly Only (2-3/4” Hook Opening)
M-G-4471BO-99 Standard Hold Down Assembly Bolt connector fabricated steel hook. M-G-4471-BO-99BH Belt & Hook Assembly Only
M-G-4471BO Heavy Duty Hold Down Assembly Hammer lock connector solid steel hook. M-G-4471BO-BH Belt & Hook Assembly Only

Roll-off Door Chain Holder

M-G-30000831
Roll-off door chain holder